Printer Configuration
9
[Network 1] Tab
Use this page to enter administrative information related to the network.
To display or configure a setting, select it in the list.
The following menus are available in the list.
• Information
•Interface
•TCP/IP
Information
Displays the printer name, the printer comment, and MAC address of the printer.
Interface
v I/O Timeout (USB)
Select the USB timeout from the drop down list.
The printer waits before ending a print job if more data is not received
through USB. When the specified period elapses, data reception through oth-
er interfaces is possible.
v I/O Timeout (Network)
Select the network timeout from the drop down list. If EOF (*) is not received
by the network printer, the printer remains waiting. When the specified peri-
od elapses, data reception through other interfaces is possible.
(*)End Of File: a code placed by a computer after a file's last byte of data.
v Ethernet Speed
Select the Ethernet communication speed. For normal use, select [Auto Select].
This allows the device to select the optimum speed.
If communication with the device fails, select [10Mbps Half D.], [10Mbps Full D.],
[100Mbps Half D.], or [100Mbps Full D.].
v Fixed USB Port
•Off
Allocates automatically a USB serial number that is different from the USB
serial numbers of other printers.
•On
Allocates automatically a USB serial number that is the same as the USB se-
rial number of other printers.
To Next Page
Loading...
