Basic Operation of Printing
• Duplex printing is selected as the default setting.
The following procedure explains how to perform basic printing.
The procedure in this section is an example based on Windows 10 and PCL 6 driver. The actual
procedure may vary depending on the operating system you are using.
For details of printing options, see the printer driver Help.
1. Open the printer properties dialog box in your document's application.
For details about how to open the printer properties dialog box, see page 58 "Displaying the
Printing Preferences Dialog Box in an Application".
For details about each setting, click [Help]. You can also click the information icons to show
configuration information.
2. Set printing options as necessary, and then click [OK].
The printer properties dialog box closes.
3. Click [Print].
3. Printing Documents
60
To Next Page
Loading...
