• A4, B5 JIS, A5 SEF, 8 1/2 × 14, 8 1/2 × 11, 8 1/2 × 13, 16K, Custom Size, 4 1/8 × 9
1/2, 3 7/8 × 7 1/2, C5 Env, C6 Env, DL Env, 5 1/2 × 8 1/2, B6 JIS, A6, A5 LEF, 8.5 ×
13.4, 8.5 × 13.6, 8.11 × 13.3
Bypass Tray Priority
Specifies how print jobs using the bypass tray are handled.
Default: [Machine Setting(s)]
• Machine Setting(s)
The paper settings configured on the machine's control panel are applied to all print jobs. An
error occurs when the paper settings specified by the printer driver or the print command do
not match the machine's settings.
• Any Size/Type
Printing proceeds even if the paper size/type settings of the printer and printer driver do not
match. However, if the paper is too small for the print job, the printed image will be cropped.
• Any Custom Size/Type
The printer prints custom size print jobs according to the printer driver’s settings and prints
standard size print jobs according to the printer's settings.
For custom size print jobs, printing proceeds even if the paper size/type settings of the printer
and printer driver do not match. However, if the paper is too small for the print job, the printed
image will be cropped.
For standard size print jobs, an error will occur if the paper size/type settings of the printer
and printer driver do not match.
Paper Tray Priority
Specifies the tray that the printer uses first for printer jobs.
If multiple trays contain valid paper, the first tray the printer finds will be used for printing; when that
tray runs out of paper, the printer automatically switches to the next tray to continue printing.
[Tray 2] appears only when the optional paper feed unit is installed.
Default: [Tray 1]
• Tray 1
• Tray 2
• Bypass Tray
Size Mismatch Detection
Sets the machine to report an error if the paper size does not match the print job's settings.
Default: [Off]
• On
• Off
Tray Paper Settings Menu
83
To Next Page
Loading...
Need help?
General
Weight and Dimensions
