Displays the machine's MAC address.
• Current Connection
Displays detailed information about the connection, such as the SSID and the wireless signal
strength.
• Input SSID
Input the SSID of the machine.
• WPS
Connects with one touch using WPS (Wi-Fi Protected Setup). For details, see Setup Guide.
• PBC
• PIN
• Wi-Fi Direct
Input the SSID of the machine to configure Wi-Fi Direct.
• W-iFi Dir. PWD
Input SSID to set a password for Wi-Fi Direct.
• Wi-Fi Direct Type
Select 2.4 GHz or 5 GHz as the wireless LAN frequency.
Default: [2.4 GHz]
• 2.4 GHz
• 5 GHz
IPv4 Configuration
• DHCP
Sets the machine to receive its IPv4 address, subnet mask, and default gateway address
automatically from a DHCP server.
Default: [Active]
• Active
• Inactive
• IP Address
Specifies the machine's IPv4 address when DHCP is not used.
Use this menu to check the current IP address when DHCP is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary according to your network environment.
• Subnet Mask
Specifies the machine's subnet mask when DHCP is not used.
Use this menu to check the current subnet mask when DHCP is used.
4. Configuring the Machine Using the Control Panel
86
To Next Page
Loading...
