Message Cause Solution
"Exceeded max. No. of pages." While printing a Sample Print,
Locked Print, Hold Print, or
Stored Print file, the maximum
page capacity was exceeded.
• Delete unneeded files
stored in the printer.
• Reduce the number of
pages to print.
"Exceeded max. print size. Press
[FormFeed] or [JobReset]."
The specified paper size
exceeds the maximum size
supported by this printer.
Press [Form Feed] to force
printing or [JobReset] to cancel
printing.
"Exceeded max. print size. Press
[JobReset]."
The specified paper size
exceeds the maximum size
supported by this printer.
Press [JobReset] to cancel
printing.
"Failed to connect to server for
Remote Diagnostics."
The printer cannot
communicate with Remote
Communication Gate.
Check the connection to the
Remote Server Gate.
"Independent-supply toner" Independent-supply toner is
set.
Use the toner recommended
for this printer.
"IPv6 Address already exists Link-
local Address(109/209)"
The same IPv6 address is
already used.
Contact your network
administrator.
"IPv6 Address already exists
Stateless Address(109/209)"
The same IPv6 address is
already used.
Contact your network
administrator.
"IPv6 Address already exists
Manual Config.
Address(109/209)"
The same IPv6 address is
already used.
Contact your network
administrator.
"Load paper in (tray name)" There is no paper in the
specified tray.
Load the specified paper in the
tray, press [JobReset] to reset
the job.
"No privileges to use funct." The logged in user does not
have the privileges to register
programs or change the paper
tray settings.
For details about how to set
permissions, see Security
Guide.
"Option RAM Error" The printer cannot detect an
optional SDRAM module.
Check that the SDRAM
module installed correctly.
3. Troubleshooting
62
To Next Page
Loading...
Need help?
General
Weight and Dimensions
