Item Description
Print Automatically Select whether the faxes received into the machine’s memory are printed
automatically or stored for later manual printing.
Print Forwarded File Select whether the forwarded faxes are printed or not.
Notify Forward Status Select whether e-mail notifications are sent after forwarding faxes or not. E-
mail notification destination depends on how [Forwarding Destination] is
specified:
• If specified with [E-mail Address]: the notification will be sent to the
administrator e-mail address specified in [Administrator E-mail
Address] in the [Administrator] page.
• If specified with [Scan Destination]: the notification will be sent to the
notification destination specified for the selected scan destination.
Note that if a destination e-mail address is not specified, no notification will
be sent even if this setting is enabled.
Forwarding Destination Specifies the forwarding destination.
• [E-mail Address]: Enter a destination e-mail address. Can contain up
to 64 characters.
• [Scan Destination]: Select a scan destination as a forwarding
destination.
Number of Trials of
Forwarding (time)
Specifies how many times the machine attempts to forward a fax (1 to 255
times).
Interval of Forwarding
Trial (min.)
Specifies how many minutes the machine waits between forwarding
attempts (1 to 255 minutes).
Authorized Reception
Item Description
Authorized Reception Enable this setting to set the machine to receive (or reject) faxes only from
the programmed Special Senders. This helps you screen out unwanted
documents, such as junk faxes, and prevents the wasting of fax paper.
Special Senders can be programmed in the [Special Sender] page.
8. Configuring the Machine Using Web Image Monitor
320
To Next Page
Loading...
Need help?
General
