RICOH SP C250SF/SP C252SF Color Multifunction Printers
Getting Started Guide
26
10. Wired Connection: Again, confirm that the
network (Ethernet) cable is connected and printer
power switch is On.
Wireless Connection: Network cable is not
required, but printer power switch must be On.
11. Click [Next >].
Important: If Cannot detect any network printers
error message appears, confirm that you have
completed step
Configure IP Address Settings.
Then, click [OK] to close error pop-up. Repeat from
step 9.
12. If necessary, select [SP C252SF], and click [Next >].
13. Click [Continue].