Density
Specifies the image density for photocopying.
Increase the level (black squares) to increase the density.
Default: The default setting is the middle of 5 adjustment levels.
Reduce/Enlarge
Specifies the percentage by which copies are enlarged or reduced.
Default: [100%]
(mainly Europe and Asia)
50%, 71%, 82%, 93%, 100%, 122%, 141%, 200%, 400%
(mainly North America)
50%, 65%, 78%, 93%, 100%, 129%, 155%, 200%, 400%
• ID Card Copy
Sets the machine to copy the front and back sides of an ID card, or other small document,
onto the front of a single sheet of paper.
• Zoom 25-400%
Color Adjustment
Specify the color balance of red, green and blue.
Increase the level (black squares) to increase the color brightness.
Default: The default setting is the middle of 5 adjustment levels.
Duplex/Combine
Specifies combined copying. Select a copy mode according to your original and how you want
the printed copies to appear. In [Manual 2 Sided Scan Mode], use the exposure glass to copy the
original. Otherwise, use the ADF. For more details, see page 109 "Copying Single-Sided Originals
with 2-Sided and Combined Printing" and see page 113 "Copying 2-Sided Originals with 2-Sided
and Combined Printing (Manual 2-Sided Copying)".
Note that enabling combined copying automatically disables ID card copying.
Default: [Off]
• Off
• 1Sd 2Orig->Comb 2on1 1Sd
Copy will be made on 1 side, on which 2 pages of 1-sided original will be printed.
• Portrait
• Landscape
• 1Sd 4Orig->Comb 4on1 1Sd
Copy will be made on 1 side, on which 4 pages of 1-sided original will be printed.
7. Configuring the Machine Using the Control Panel
194
To Next Page
Loading...
