EasyManua.ls Logo

Ricoh SP C250SF - Copying both Sides of an ID Card Onto One Side of Paper; Copying an ID Card

Ricoh SP C250SF
380 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Copying Both Sides of an ID Card onto One
Side of Paper
This section explains how to copy the front and back sides of an ID card or other small documents onto
one side of a sheet of paper.
This function is available only when the original is set on the exposure glass, not when it is set in the
ADF.
To use this function, the paper size used for printing copies must be set to A4 or Letter.
Printed paper size Scanned paper size
A4 A5 (148×210 mm)
Letter Half Letter (140×216 mm)
CES165
Copying an ID Card
1. Press the [ID Card Copy] key.
DAC508
To make the [ID Card Copy] key enable ID card copy mode for the current job, [Shortcut to
Function] under administrator settings must be set to [ID Card Copy Mode].
4. Copying Originals
116

Table of Contents

Other manuals for Ricoh SP C250SF

Related product manuals