• 9.6 Kbps
• 7.2 Kbps
• 4.8 Kbps
• 2.4 Kbps
• Reception Speed
Specifies the reception speed for the fax modem.
Default: [33.6 Kbps]
• 33.6 Kbps
• 14.4 Kbps
• 9.6 Kbps
• 7.2 Kbps
• 4.8 Kbps
• 2.4 Kbps
• JBIG
Enables transmission and reception of JBIG-compressed images.
Note that to use this function, [ECM Transmission] and [ECM Reception] must also be
enabled.
This function is not available with Internet Fax.
Default: [Active]
• Active
• Inactive
Report Print Settings
• Print TX Status Report
Sets the machine to print a transmission report automatically after a fax transmission.
When the machine is in Immediate Transmission mode, the image of the original will not be
reproduced on the report, even if [Error Only (Image Attached)] or [Every TX (Image
Attached)] is selected.
Note that if a memory error occurs for LAN-Fax transmission, a transmission report will always
be printed regardless of this setting.
The transmission report will be printed on A4 or Letter size paper.
Default: [Every TX (Image Attached)]
The default depends on the [Country] setting.
• Error Only
Prints a report when a transmission error occurs.
7. Configuring the Machine Using the Control Panel
206
To Next Page
Loading...
