EasyManuals Logo

Ricoh SP C250SF User Manual

Ricoh SP C250SF
380 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #309 background imageLoading...
Page #309 background image
Problem Solution
Multiple sheets of paper are fed at
once.
Fan the paper well before loading. Also make sure that
the edges are aligned by tapping the stack on a flat
surface such as a desk.
Make sure that the paper guides are in the right position.
Use supported types of paper. See page 57 "Supported
Paper".
Load paper only as high as the upper limit markings on
the paper guide.
Make sure that the friction pads, paper feed rollers or
registration rollers are clean. See page 288 "Cleaning
the Friction Pad and Paper Feed Roller" and page 291
"Cleaning the Registration Roller and Paper Tray".
Check that paper was not added while there was still
some left in the tray.
Only add paper when there is none left in the tray.
The printed paper is wrinkled. The paper being used may be damp. Use paper that has
been stored properly. See page 57 "Supported Paper".
Paper is too thin. See page 57 "Supported Paper".
If there are gaps between the paper and the paper
guides, adjust the paper guides to remove the gaps.
Check that both the left and right fusing unit levers have
been raised to the plain paper mark.
The printed paper is curled. Load the paper upside down in the paper tray.
If the paper curl is severe, retrieve prints from the output
tray more frequently.
The paper being used may be damp. Use paper that has
been stored properly. See page 57 "Supported Paper".
Select [Lvl.2: Medium] or [Lvl.3: Strong] in [Anti-Humidity
Level] under [System Settings]. Note that if you select [Lvl.
2: Medium] or [Lvl.3: Strong], the first print takes longer
than subsequent prints.
Paper Feed Problems
307

Table of Contents

Other manuals for Ricoh SP C250SF

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh SP C250SF and is the answer not in the manual?

Ricoh SP C250SF Specifications

General IconGeneral
Print technologyLaser
Maximum resolution2400 x 600 DPI
Time to first page (black, normal)14 s
Print speed (black, normal quality, A4/US Letter)20 ppm
Copier resize25 - 400 %
Maximum copy resolution600 x 600 DPI
Maximum number of copies99 copies
Scan toE-mail
Scan driversTWAIN
Image formats supportedJPG, TIF
Document formats supportedPDF
Optical scanning resolution1200 x 1200 DPI
Faxing-
Modem speed33.6 Kbit/s
Fax coding methodsJBIG, MH, MMR (Fax coding method), MR
Fax resolution (black)200 x 100 DPI
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle30000 pages per month
Page description languagesPCL 5c, PCL 6, PostScript 3
Internal memory256 MB
Processor familyIntel® Celeron® M
Processor frequency400 MHz
Card reader integratedNo
Total input capacity251 sheets
Total output capacity- sheets
Maximum input capacity751 sheets
Duplex media weight60 - 90 g/m²
Paper tray media typesBond paper, Card stock, Labels, Plain paper, Pre-Printed, Recycled paper, Thick paper, Thin paper
Paper tray media weight60 - 160 g/m²
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Product colorBlack, White
Market positioningBusiness
Ethernet LANYes
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100Base-T(X)
Ethernet LAN data rates10, 100 Mbit/s
Standard interfacesEthernet, USB 2.0, Wireless LAN
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)1300 W
Power consumption (PowerSave)3.8 W
Power consumption (average operating)- W
Mac operating systems supportedMac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Server operating systems supportedWindows Server 2003, Windows Server 2008, Windows Server 2008 R2
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth493 mm
Width420 mm
Height460 mm
Weight29000 g

Related product manuals