Message Causes Solutions
Fax Job Memory
Overflow
The number of fax jobs in
memory (unsent or unprinted
faxes) has reached maximum,
so new jobs cannot be stored.
Wait until pending jobs have been
transmitted or printed.
Indep.Sply.Toner: X A non-supported print cartridge
is installed for the indicated
color.
Remove and replace it with a print
cartridge specified by an authorized
dealer.
Internal Misfeed Paper has been jammed in the
machine.
Remove the jammed paper. See page 306
"Paper Feed Problems".
Memory Overflow • The data is too large or
complex to print.
• If you try to print a Locked
Print file stored in the
machine with the printer
driver's [Gradation:] set to
[Fine] in the [Print Quality]
tab, printing may be
canceled depending on
the machine's current
memory usage.
• When performing printing
on Legal size paper under
certain print quality setting,
print data becomes too
large and the job may be
canceled.
• Select [600 x 600 1bit] in
[Resolution] under [Printer Features]
to reduce the size of data. See
page 220 "Printer Features Settings".
• Print or delete other Locked Print files
in the machine, and then print the
Locked Print file that the machine
failed to print. Alternately, resend the
Locked Print file to the machine with
[Gradation:] set to [Speed] or
[Standard], and then print the Locked
Print file.
• If using the PCL printer driver, set
[Gradation:] in [Print Quality] to
[Speed] or [Standard]. If using the
PostScript 3 printer driver, set [Print
Quality] in [Printer Features] to
[Standard] or [High Quality].
Memory Overflow • The machine's memory
reached its capacity while
scanning the first page of
the original to store a fax
job in memory before
transmission.
• The machine's memory
reached its capacity while
sending a fax via LAN-Fax.
Resend the fax in parts as several smaller
faxes, or send at a lower resolution.
10. Troubleshooting
338
To Next Page
Loading...
Need help?
General
Weight and Dimensions
