Ricoh SP C250SF - Page 74

3. Pinch the clip on the side paper guide and slide it to match the paper size.
DAC051
When loading custom size paper, position the paper guide slightly wider than the actual paper
size.
4. Pinch the end paper guide and slide it inward to match the paper size.
DAC053
When loading custom size paper, position the paper guide slightly wider than the actual paper
size.
5. Load new sheets of paper aligned with their side to be printed face down.
Make sure the paper is not stacked higher than the upper limit marked inside the tray.
The upper limit mark in Tray 2 differs from the illustrated mark.
DAC052
2. Loading Paper
72