Ricoh SP C250SF - Page 82

1. Press the [User Tools] key.
DAC509
2. Press the [ ] or [ ] key to select [Tray Paper Settings], and then press the [OK] key.
3. Press the [ ] or [ ] key to select the paper size setting for the desired tray, and then press
the [OK] key.
4. Press the [ ], [ ],[ ], or [ ] key to select the desired paper size, and then press the [OK]
key.
5. Press the [User Tools] key to return to the initial screen.
Specifying a custom paper size
This section explains how to specify a custom paper size.
• When you perform printing, make sure that the paper size specified with the printer driver matches
the paper size specified with the control panel. If a paper size mismatch occurs, a message
appears on the display. To ignore the error and print using mismatched paper, see page 89 "If a
Paper Mismatch Occurs".
• Custom size paper cannot be loaded in Tray 2.
1. Press the [User Tools] key.
DAC509
2. Press the [ ] or [ ] key to select [Tray Paper Settings], and then press the [OK] key.
2. Loading Paper
80