• Sticky originals such as translucent paper
• Thin, highly flexible originals
• Thick originals such as postcards
• Bound originals such as books
• Transparent originals such as OHP transparencies or translucent paper
• Originals that are wet with toner or correction fluid
Unscannable image area
Even if you correctly place originals in the ADF or on the exposure glass, margins of a few millimeters on
all four sides of the original might be chipped.
Margins when using exposure glass
In copier mode In scanner mode In fax mode
Top 4 mm (0.2 inches) 0 mm (0 inches) 1 mm (0.05 inches)
Right 3 mm (0.1 inches) 0 mm (0 inches) 1 mm (0.05 inches)
Left 3 mm (0.1 inches) 0 mm (0 inches) 1 mm (0.05 inches)
Bottom 4 mm (0.2 inches) 0 mm (0 inches) 2 mm (0.08 inches)
Margins when using ADF
In copier mode In scanner mode In fax mode
Top 4 mm (0.2 inches) 0 mm (0 inches) 0 mm (0 inches)
Placing Originals
83
To Next Page
Loading...
