Copying Single-Sided Originals with 2-Sided
and Combined Printing
This section explains how to combine and print a multiple pages (two or four pages) on one side or both
sides of paper.
• This function is only available when the original is set in the ADF, not when it is set on the exposure
glass.
• To use combined copy, the paper size used for printing copies must be set to A4, Letter or Legal.
• To use 2-sided copy, the paper size used for printing copies must be set to A4, B5 JIS, Legal,
Letter, Executive, 8 × 13, 8
1
/
2
× 13, Folio, or 16K.
• The paper for 2-sided copy is fed from Tray 1 or 2, but not from the bypass tray.
• The types of paper that can be used for 2-sided copy are thin, plain, middle thick, recycled, color,
preprinted and prepunched.
There are following copy modes. Select a copy mode according to your original and how you want the
copy outputs to appear.
Combined copy on one side
In this mode, a two or four-page original is combined and printed on one side of paper.
• 1Sd 2Orig->Comb 2on1 1Sd
To Next Page
Loading...
Need help?
General
Weight and Dimensions
