EasyManuals Logo

Ricoh SP C252SF User Manual

Ricoh SP C252SF
380 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
If the ID card copy mode does not appear even though you have pressed the [ID Card Copy] key,
set [Shortcut to Function] to [ID Card Copy Mode], and then press the [ID Card Copy] key again.
For [Shortcut to Function], see page 228 "Administrator Settings".
2. Place the original front side down and top to the machine rear on the exposure glass.
Place the original in the center of the A5/Half Letter scan area.
DAC601
3. Press the [B&W Start] key or [Color Start] key.
A message prompting you to place the original back side down on the exposure glass appears on
the display.
4. Place the original back side down and top to the machine rear on the exposure glass, and
then press the [B&W Start] key or [Color Start] key again.
Use the same mode (color or black-and-white) for both sides.
After you load the originals, press the [B&W Start] key or [Color Start] key within the time specified
in [System Auto Reset Timer]. Otherwise, the job is canceled. For details, see page 228
"Administrator Settings".
Regardless of the machine's reduction or enlargement ratio setting, an ID card copy will always be
made at 100%.
Temporary job settings are cleared in the following cases:
When no input is received for the period of time specified in [System Auto Reset Timer] while
the initial screen is displayed. For details, see page 228 "Administrator Settings".
When the [Clear/Stop] key is pressed while the initial screen is displayed.
When the machine's mode is changed.
When the power is turned off.
When the machine's default for the same setting is changed.
Copying Both Sides of an ID Card onto One Side of Paper
117

Table of Contents

Other manuals for Ricoh SP C252SF

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh SP C252SF and is the answer not in the manual?

Ricoh SP C252SF Specifications

General IconGeneral
Digital sender-
Maximum duty cycle65000 pages per month
Page description languagesPCL 5c, PCL 6, PostScript 3
Duplex printingYes
Print technologyLaser
Maximum resolution2400 x 600 DPI
Time to first page (black, normal)14 s
Print speed (black, normal quality, A4/US Letter)20 ppm
Processor familyIntel® Celeron® M
Processor frequency400 MHz
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)1300 W
Power consumption (average operating)- W
Copier resize25 - 400 %
Maximum copy resolution600 x 600 DPI
Maximum number of copies99 copies
FaxingColor faxing
Modem speed33.6 Kbit/s
Fax coding methodsJBIG, MH, MMR (Fax coding method), MR
Fax resolution (black)200 x 100 DPI
Paper tray media typesBond paper, Card stock, Envelopes, Labels, Letterhead, Plain paper, Pre-Printed, Recycled paper, Thick paper, Thin paper
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Total input capacity251 sheets
Total output capacity150 sheets
Maximum input capacity751 sheets
Standard interfacesEthernet, USB 2.0, Wireless LAN
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100Base-T(X)
Ethernet LAN data rates10, 100 Mbit/s
Scan toE-mail, File
Scan driversTWAIN
Scanner typeADF scanner
Image formats supportedJPG
Document formats supportedPDF
Optical scanning resolution1200 x 1200 DPI
Product colorBlack, White
Market positioningBusiness
Weight and Dimensions IconWeight and Dimensions
Depth493 mm
Width420 mm
Height460 mm

Related product manuals