Ricoh SP C252SF User Manual

Problem Solution
Multiple sheets of paper are fed at
once.
• Fan the paper well before loading. Also make sure that
the edges are aligned by tapping the stack on a flat
surface such as a desk.
• Make sure that the paper guides are in the right position.
• Use supported types of paper. See page 57 "Supported
Paper".
• Load paper only as high as the upper limit markings on
the paper guide.
• Make sure that the friction pads, paper feed rollers or
registration rollers are clean. See page 288 "Cleaning
the Friction Pad and Paper Feed Roller" and page 291
"Cleaning the Registration Roller and Paper Tray".
• Check that paper was not added while there was still
some left in the tray.
Only add paper when there is none left in the tray.
The printed paper is wrinkled. • The paper being used may be damp. Use paper that has
been stored properly. See page 57 "Supported Paper".
• Paper is too thin. See page 57 "Supported Paper".
• If there are gaps between the paper and the paper
guides, adjust the paper guides to remove the gaps.
• Check that both the left and right fusing unit levers have
been raised to the plain paper mark.
The printed paper is curled. • Load the paper upside down in the paper tray.
• If the paper curl is severe, retrieve prints from the output
tray more frequently.
• The paper being used may be damp. Use paper that has
been stored properly. See page 57 "Supported Paper".
• Select [Lvl.2: Medium] or [Lvl.3: Strong] in [Anti-Humidity
Level] under [System Settings]. Note that if you select [Lvl.
2: Medium] or [Lvl.3: Strong], the first print takes longer
than subsequent prints.
Paper Feed Problems
307

Ricoh SP C252SF Specifications

General

Digital sender	-
Maximum duty cycle	65000 pages per month
Page description languages	PCL 5c, PCL 6, PostScript 3
Duplex printing	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	14 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Processor family	Intel® Celeron® M
Processor frequency	400 MHz
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1300 W
Power consumption (average operating)	- W
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
Faxing	Color faxing
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax resolution (black)	200 x 100 DPI
Paper tray media types	Bond paper, Card stock, Envelopes, Labels, Letterhead, Plain paper, Pre-Printed, Recycled paper, Thick paper, Thin paper
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Total input capacity	251 sheets
Total output capacity	150 sheets
Maximum input capacity	751 sheets
Standard interfaces	Ethernet, USB 2.0, Wireless LAN
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
Ethernet LAN data rates	10, 100 Mbit/s
Scan to	E-mail, File
Scan drivers	TWAIN
Scanner type	ADF scanner
Image formats supported	JPG
Document formats supported	PDF
Optical scanning resolution	1200 x 1200 DPI
Product color	Black, White
Market positioning	Business

Weight and Dimensions

Depth	493 mm
Width	420 mm
Height	460 mm