Ricoh SP C252SF User Manual

Message Causes Solutions
RX Comm. Error A reception error occurred, and
the fax could not be received
correctly.
If possible, contact the sender of the fax
and ask them to resend it.
Scan (NW)
Disconnected
A scanned file could not be sent
because the Ethernet cable was
not connected properly.
Reconnect the Ethernet cable properly,
and then try the operation again.
Scan (USB)
Disconnected
The USB cable was
disconnected while scanning
from a computer.
Reconnect the USB cable properly, and
then try the operation again.
Server Connection
Failed
A scanned file could not be sent
because the destination could
not be reached.
Check if the destination is registered
correctly, and then try the operation again.
Server Response
Error
An error occurred in
communication with the server
before beginning transmission.
Check if the destination is registered
correctly, and then try the operation again.
If the problem persists, contact the network
administrator.
Service call - SCXXX A fatal hardware error has
occurred, and the machine
cannot function.
Contact your sales or service
representative.
Set Correct Paper The tray selected in [Select
Paper Tray] under [Fax
Features] does not contain A4,
Letter, or Legal size paper.
While the message is displayed, press the
[OK] key. A menu for changing the paper
size specified for the current tray appears.
Load A4/Letter/ Legal size paper in the
tray, and then select the corresponding
paper size using [ ] or [ ] key and press
the [OK] key. The machine will print out the
fax.
Note that the paper size setting for the tray
under tray paper settings will be changed.
See page 215 "Tray Paper Settings".
10. Troubleshooting
340

Ricoh SP C252SF Specifications

General

Digital sender	-
Maximum duty cycle	65000 pages per month
Page description languages	PCL 5c, PCL 6, PostScript 3
Duplex printing	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	14 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Processor family	Intel® Celeron® M
Processor frequency	400 MHz
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1300 W
Power consumption (average operating)	- W
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
Faxing	Color faxing
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax resolution (black)	200 x 100 DPI
Paper tray media types	Bond paper, Card stock, Envelopes, Labels, Letterhead, Plain paper, Pre-Printed, Recycled paper, Thick paper, Thin paper
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Total input capacity	251 sheets
Total output capacity	150 sheets
Maximum input capacity	751 sheets
Standard interfaces	Ethernet, USB 2.0, Wireless LAN
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
Ethernet LAN data rates	10, 100 Mbit/s
Scan to	E-mail, File
Scan drivers	TWAIN
Scanner type	ADF scanner
Image formats supported	JPG
Document formats supported	PDF
Optical scanning resolution	1200 x 1200 DPI
Product color	Black, White
Market positioning	Business

Weight and Dimensions

Depth	493 mm
Width	420 mm
Height	460 mm