Ricoh SP C260SFNw Setup Guide

4
2. Installing the Software
Check how the computer is connected
Specify how to connect to your computer according to the communication environment of your system.
connect by
USB interface cable
connect by
Ethernet interface cable
use router (access point)?
Yes
No
connect by wireless?
connect by wired?
connect via Wi-Fi Direct
See Wi-Fi Direct Guide in our website .
use computer?
connect using Wi-Fi Setup Wizard
connect using CD-ROM
DUE035
Go to page 5 "Connecting the Machine (USB/Network)".
Go to page 6 "Easy Setup
Using the CD-ROM".
Go to page 7 "Easy Setup Using
the Wi-Fi Setup Wizard".
•To connect using the WPS button, go to page 8 “Easy Setup Using the WPS Button”.
•To connect using a PIN code, go to page 9 “Easy Setup Using a PIN Code”.
•To set up manually, see User’s Guide in the provided CD-ROM or our website.
•When the Wi-Fi Direct function is enabled, a Wi-Fi Direct compliant device is recognized as a router (access point), and direct
communication among Wi-Fi Direct-compliant devices becomes possible.
When communicating using the Wi-Fi Direct function, you cannot connect to the Internet at the same time.
Use the machine from a smart device
Android iOS
■How to use the machine from a
smart device
From smart device applications, you can use the
following functions of the machine:
•Sending scanned images or documents from
the machine to the smart device
•Printing photographs and documents stored on
a smart device
After scanning the following QR code with
your smart device, search for the "RICOH SP
C260 series Scan" or "RICOH Smart Device
Connector" application and download either of
them from the site that appears.
DUE033
■How to use the NFC tag
(Android smart devices only)
1. Configure the network connection of
the machine. For details, see page 6
"Connecting the Machine via Wi-Fi".
2. After scanning the following QR code with
your smart device, search for the "RICOH SP
C260 series Scan" or "RICOH Smart Device
Connector" application and download either
of them from the site that appears.
3. Start "RICOH SP C260 series Scan" or
"RICOH Smart Device Connector", and
write the machine's network information
on the NFC tag using the application.
4. Perform printing by touching the NFC tag
from "RICOH Smart Device Connector" or
perform scanning from "RICOH SP C260
series Scan".
Android iOS

Ricoh SP C260SFNw Specifications

General

Brand	Ricoh
Model	SP C260SFNw
Category	All in One Printer
Language	English