6
Connecting the Machine via Wi-Fi
DUE038
Easy Setup Using the CD-ROM
● The following items are necessary to set up a wireless
connection.
● USB interface cable or Ethernet interface cable
● Router (access point)
● CD-ROM supplied with the machine
● To install the software, quick installation and manual
installation can be used. Using the manual installation,
you can specify data to be installed as you prefer.
1. Turn on your computer.
2. Insert the provided CD-ROM into the CD-ROM drive of the
computer.
If your computer does not have a CD-ROM drive, download a
setup file from our website.
or
3. Click [Quick Install].
4. The software license agreement appears in the [Software
License Agreement] dialog box. After reading the
agreement, click [Yes].
5. Select [Wireless Connection].
6. Follow the instructions in the setup wizard.
7. Click [Finish] in the [Setup Complete] dialog box. If the
installer prompt you to restart Windows, reboot your
computer.
Setup is completed.
To connect using the Wi-Fi Setup Wizard, go to page 7
“Easy Setup Using the Wi-Fi Setup Wizard”.
To connect using the WPS button, go to page 8 “Easy
Setup Using the WPS Button”.
To connect using a PIN Code, go to page 9 “Easy
Setup Using a PIN Code”.
To connect using Wi-Fi Direct, see Wi-Fi Direct Guide in
our website.
Windows
To Next Page
Loading...
Need help?
General
