Problem Cause Solution
An error has occurred. A function that has the
status "Error Occurred" in
the [Check Status] screen is
defective.
Press [Check], and then check the
displayed message and take appropriate
action. For details about error messages
and their solutions, see page 65
"When Messages Are Displayed".
The printer is unable to
connect to the network.
A network error has
occurred.
• Press [Check], and then check the
displayed message and take
appropriate action. For details
about error messages and their
solutions, see page 65 "When
Messages Are Displayed".
• Check that the printer is correctly
connected to the network and that
the printer is correctly set. For details
about how to connect the network,
see "Interface Settings", Operating
Instructions.
• For details about connecting to the
network, contact your administrator.
• If the indicator is still lit even after
trying to solve the problem as
described here, contact your service
representative.
When Checking the Indicator Lamps, Status Icons, and Messages on the Control Panel
63
To Next Page
Loading...
