Message Cause Solution
"Tray setg. do not match
spcfd siz&typ. Select new
tray or use siz&typ below."
The printer driver settings are
incorrect or the tray does not
contain paper of the size or type
selected in the printer driver.
• Check that the printer driver
settings are correct, and then
load paper of the size
selected in the printer driver
into the input tray. For details
about how to load paper,
see page 33 "Loading
Paper".
• Select the tray manually to
continue printing, or cancel
a print job. For details about
how to select the tray
manually, or cancel a print
job, see "If an Error Occurs
with the Specified Paper Size
and Type", Operating
Instructions.
"Waste Toner Bottle is
almost full. A new Waste
Toner Bottle is required.
Please contact your local
vendor."
The waste toner bottle must be
replaced when the life of the
waste toner is ending.
Prepare a new waste toner bottle.
"Waste Toner Bottle is full.
Replace the bottle."
The waste toner bottle is full. Replace the waste toner bottle.
For details, see "Replacing Other
Consumables", Operating
Instructions.
When Messages Are Displayed
71
To Next Page
Loading...
