Message Cause Solution
"Duplex has been
cancelled."
Duplex printing was canceled. • Select the proper paper size
for the duplex function. For
details about paper size, see
page 34 "Paper Size
Specifications".
• Change the setting for
"Apply 2 sided" in [System
Settings] to enable duplex
printing for the paper tray.
For details about setting
"Apply 2 sided", see "Tray
Paper Settings", Operating
Instructions.
"Error has occurred." A syntax error, etc., occurred. Check that the PDF file is valid.
"Error occurred. Either job
was printed with settings
changed or it was
cancelled."
An error occurred during printing,
but it was skipped.
Check that the data is valid.
"Excdd max. No. of files to
print for temp./stored jobs."
While printing a Sample Print,
Locked Print, Hold Print, or Stored
Print file, the maximum file
capacity was exceeded.
Delete unneeded files stored in
the printer.
"Excdd max. No. of files.
(AT)"
While using the error job store
function to store Normal Print jobs
as Hold Print files, the maximum
file capacity for file storage or
Hold Print file management
(automatic) was exceeded.
Delete Hold Print files (automatic)
or unneeded files stored in the
printer.
"Excdd max. No. of
pages(AT)"
While using the error job store
function to store Normal Print jobs
as Hold Print files, the maximum
page capacity was exceeded.
• Delete unneeded files stored
in the printer.
• Reduce the number of pages
to print.
"Exceeded max. No. of
pages for temporary/stored
jobs."
While printing a Sample Print,
Locked Print, Hold Print, or Stored
Print file, the maximum page
capacity was exceeded.
• Delete unneeded files stored
in the printer.
• Reduce the number of pages
to print.
3. Troubleshooting
74
To Next Page
Loading...
Need help?
General
Weight and Dimensions
