Ricoh WG-M1 - Motion Detection

52
Field of View
Field of View sets the viewing angle.
There are 4 options in 「Field of View」:
•
Wide
•
Medium
•
n
a
r
r
o
w
n
a
r
r
o
w
n
a
r
r
o
w
n
a
r
r
o
w
n
a
r
r
o
w
n
a
r
r
o
w
Narrow
• Underwater
Field of View method of operation:
1. After selecting the Field of View angle,
press to return to the viewnder status.
LCD will display corresponding icons;
2. Press
to start recording;
3. Press again to nish recording.
Medium or Narrow can only be selected
when the Movie Size is set to
1080
. If a
Movie Size other than
1080
is selected
under Medium or Narrow status, the
product will automatically set the Field of
View to Wide.
Motion detection
Motion detection means that if the product
detects moving objects entering into the
LCD screen, it will automatically start
recording. During the recording process, if
there is no moving object detected for 10
consecutive seconds, the recording will pause
automatically.
There are 2 options in 「Motion detection」:
•
Off
• Enable
Motion detection method of operation:
1. After the Motion detection is enabled, press
to back to the viewnder status. LCD will
display corresponding icons;
2. Press . If the product detects moving
objects, it will automatically start recording;
3. The product will stop recording when there
is no moving object detected for 10seconds;
4. When the object moves again, the product
will start recording automatically, and this
time it will regenerate a video le;
5. Press to stop recording.