58
AP Settings Introduction
The camera can be wirelessly connected with your smart device.
Please review the following items before your rst connection:
1. Your smart device system version needs to be iOS 6.0-7.1 or Android 4.0-4.3. If not, please
upgrade your smart device system version rst.
2. Please do not use in places having high intensity magnetic eld, electrostatic and electric wave
interference (for example near a microwave oven), which may cause failure in receiving signals.
3. Please maintain a distance between the camera and the smart device less than 10 meters (32.8
feet) without signal shielding interference.
4. Please do not use wireless connection function on a plane.
5. The camera and the smart device can only be connected one to one.
6. When the temperature of the battery is too high.
① AP setting cannot be enabled;
②
Wireless connection will be automatically disconnected.
To Next Page
Loading...
