77
Connect to a Computer
Connection Port Introduction
You can use the USB cable to connect the
camera and copy (transmit) images to a
computer.
Transferring images to your computer
Follow the steps below to connect the camera
to a computer.
1. Make sure the computer is turned on.
2. Connect one end of the supplied USB cable
to the USB port on your camera.
3. Connect the other end of the USB cable to
an available USB port on your computer.
4. The computer will automatically detect the
camera as a removable drive. Double-click
the Computer icon on the desktop to locate
the removable drive and to copy folders and
les in the drive to a directory on your PC.
5. After the transmission is complete,
disconnect the USB cable according to
the instructions specifying how to safely /
remove USB devices.
To Next Page
Loading...
