ScrsaverActive
➥Display
ON Screensaver can activate when RD60xx Output is ON.
OFF Screensaver will NOT activate with the RD60xx Output enabled.
ScrsaverBright
➥Display
Brightness of display when ‘Screensaver’ activated.
OFF Turn off the display (Black Screen) when screensaver is activated.
Settable Range: 0 - 4
Notes:
● Values (0-4) are equivalent to the same value in ‘backlight’.
○ Ie, ‘ScrsaverBright’ 2 = ‘backlight 2.
● When changing this setting, the display will adjust the backlight to ‘preview’ the
effect.
● ‘ScrsaverBright’ must be less or equal to the equivalent ‘Backlight’ value for
normal operation.
Server IP
➥Communication
Settable Range: 000.000.000.000 - 255.255.255.255
Edit IP address of the server (if it was assigned during WiFi setup).
Note:
This is the IP address of the server (it will connect to port 8080).
i.e. your phone, PC, web server, etc...
To Next Page
Loading...
