RIDGID K-45 - Specifications

Ridge Tool Company
6
K-45 Drain Cleaning Machine
Specifications
K-45 Line Capacity
Motor Type ....................Universal
Motor Rating
120V Motor................. Double Insulated
120 VAC single phase
3,2 amp, 50/60 Hz
120 V
˜
3,2 A, 50/60 Hz
230V Motor................. Double Insulated
230 V
˜,
50/60 Hz
2,2 A, 280 W
ON/OFF Switch ............Variable Speed Reversing
No Load Speed ............0-600 r/min (RPM)
Drain Line Capacity.....
3
/
4
" (20 mm) thru 2
1
/
2
" (75 mm)
Weight w/C1-IC Cable
Manual Feed..............12.6 lbs. (5.7 kg)
AUTOFEED Feed.......13.8 lbs. (6.3 kg)
The machine serial number is located on the underside
of the power unit. The last 4 digits indicates the month and
year of the manufacture. (04 = month, 10 = year).
Standard Equipment
All K-45 Drain Cleaning Machines come with one pair of
RIDGID Drain Cleaning gloves.
The K-45 drain cleaner is protected under various U.S.
and International patents, including 7,685,669.
This machine is made to clean drains. If
properly used it will not damage a drain that is in good
condition and properly designed, constructed and main-
tained. If the drain is in poor condition, or has not been
properly designed, constructed and maintained, the drain
cleaning process may not be effective or could cause
damage to the drain. The best way to determine the con-
dition of a drain before cleaning is through visual inspec-
tion with a camera. Improper use of this drain cleaner can
damage the drain cleaner and the drain. This machine
may not clear all blockages.
NOTICE
Hand Grip
Slide Action Chuck
FORWARD/
REVERSE
Switch
Variable Speed
ON/OFF Switch
Hand Grip
Slide Action Chuck
FORWARD/
REVERSE
Switch
Variable Speed
ON/OFF Switch
Drum
Cable
Drum
Cable
AUTOFEED
Advance
Feed
Lever
Retrieve
Feed
Lever
GFCI
(If Equipped, 120V Units)
GFCI
(If Equipped, 120V Units)
Warning
Label
Date Code
See Accessories section for a listing of available cables and lengths
Cable Size Recommended Line Size
1
/
4
" (6 mm)
3
/
4
" to 1
1
/
2
" (20 mm to 38 mm)
5
/
16
" (8 mm)
3
/
4
" to 1
1
/
2
" (20 mm to 38 mm)
5
/
16
" (8 mm) IC (Inner Core) 1
1
/
4
" to 2" (30 mm to 50 mm)
3
/
8
" (10 mm) 1
1
/
4
" to 2
1
/
2
" (30 mm to 75 mm)
Figure 1 – K-45 Drain Cleaning Machine With Slide
Action Chuck
Figure 2 – K-45 AF Drain Cleaning Machine With AUTO-
FEED
Figure 3 – Machine Serial Number