Need help?Do you have a question about the RIDGID R4513 and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Motor | 15 Amp |
| Blade Diameter | 10 inches |
| Max RPM | 5000 RPM |
| Cut Depth at 45 degrees | 2-1/4 inches |
| Table Material | Aluminum |
| Depth of Cut at 45 degrees | 2-1/4 inches |
| Arbor Size | 5/8 inches |
| Cut Depth at 90 degrees | 3-1/2 in |
| No Load Speed | 5, 000 r/min |
| Bevel Capacity | 0 to 45 degrees |
| Depth of Cut at 90 degrees | 3-1/2 in |
To Next Page
