CCP-1116 Commentary Control Panel – Quick Guide 1.2
Page 11
Commentator A -> B
Commentator B -> A
Please keep in mind, that on audio functions on other ports to call/listen to the Commentator B
also the 2
nd
audio channel of the CCP-1116 have to be used. Therefore you have to activate the
flag “to 2
nd
channel” in the properties of the function. It is useful to manually label the key in “Com
B” or similar.
ATTENTION: For the Commentator B there are some limitations at the moment:
- Reply is not working correctly for the Commentator B (for the 2
nd
audio channel)
- It is not possible, to use an IFB from the IFB-Tabelle for the 2
nd
Commentator. Here you have to
configure an IFB in the „manual“ way for the 2
nd
audio channel.
To Next Page
Loading...
