Need help?Do you have a question about the Riedel NSA-002A and is the answer not in the manual?
Explains the meaning of danger, warning, and caution symbols used in the manual.
Provides essential safety guidelines for voltage, service, and environmental conditions.
Details the front and back panel components, connectors, and LEDs of the NSA-002A.
Explains the meaning of various LEDs indicating device mode, PTP status, and network activity.
Provides pinout diagrams and specifications for analog, GPI, and ETH/PoE ports.
Describes the available mounting kits: Bumper SPK-001 and Rack-Mount RMK-001.
Guides on connecting the AES67 network and analog audio interfaces to the NSA-002A.
Explains powering the NSA-002A via PoE or mains connection, including redundancy options.
Details the Bolero and Manual operating modes and how to switch between them.
Configuring up to six streams to be received by the NSA-002A, including status.
Configuring streams to be transmitted by the NSA-002A, with six channels for analog inputs.
Setting IP parameters, audio configuration, receiver delay, and firmware updates.
Configuring PTP, SIP, and SAP parameters for network synchronization and discovery.
Provides dimensional drawings of the NSA-002A from top and side views.
Lists detailed technical specifications for type, inputs/outputs, power, dimensions, and environment.
Guide to using NMOS-Explorer for discovering and managing IP media devices.
Provides contact information for customer service, technical support, and repair procedures.
A dedicated section for any miscellaneous notes or comments regarding the NSA-002A.
Explains the meaning of danger, warning, and caution symbols used in the manual.
Provides essential safety guidelines for voltage, service, and environmental conditions.
Details the front and back panel components, connectors, and LEDs of the NSA-002A.
Explains the meaning of various LEDs indicating device mode, PTP status, and network activity.
Provides pinout diagrams and specifications for analog, GPI, and ETH/PoE ports.
Describes the available mounting kits: Bumper SPK-001 and Rack-Mount RMK-001.
Guides on connecting the AES67 network and analog audio interfaces to the NSA-002A.
Explains powering the NSA-002A via PoE or mains connection, including redundancy options.
Details the Bolero and Manual operating modes and how to switch between them.
Configuring up to six streams to be received by the NSA-002A, including status.
Configuring streams to be transmitted by the NSA-002A, with six channels for analog inputs.
Setting IP parameters, audio configuration, receiver delay, and firmware updates.
Configuring PTP, SIP, and SAP parameters for network synchronization and discovery.
Provides dimensional drawings of the NSA-002A from top and side views.
Lists detailed technical specifications for type, inputs/outputs, power, dimensions, and environment.
Guide to using NMOS-Explorer for discovering and managing IP media devices.
Provides contact information for customer service, technical support, and repair procedures.
A dedicated section for any miscellaneous notes or comments regarding the NSA-002A.
General| Model | NSA-002A |
|---|---|
| Manufacturer | Riedel |
| Impedance | 75 Ohms |
| Protocols | SDI |
| Audio Support | Yes |
| Interfaces | BNC |
To Next Page