What does it mean when my Riello UPS alarm list shows F07, L24, L09, L10, L11, L12, L13, L14, L15, L16 codes?
If the alarm list of your Riello UPS shows one or more of the following codes: F07, L24, L09, L10, L11, L12, L13, L14, L15, L16, it indicates that the load applied to the UPS is too high. Reduce the load.
What does it mean when my Riello UPS alarm list shows L01 code?
If the alarm list of your Riello UPS shows one or more of the following codes: L01, it indicates a fault at the UPS input stage. Activate the maintenance bypass SWMB (if present), turn the UPS off and on again.
What does it mean when my Riello UPS alarm list shows L01, L02, L03, L04, L06, L07, L08 codes?
If the alarm list of your Riello UPS shows one or more of the following codes: L01, L02, L03, L04, L06, L07, L08, it could be due to: * Faulty loads applied: Remove the load. Insert the maintenance bypass SWMB (if present), and turn the UPS off and then on again. * Fault in the input or output stage of the UPS: Activate the maintenance bypass SWMB (if present) and turn the UPS off and then on again.
What does it mean when my Riello UPS alarm list shows L08, L09, L10, L11, L12, L13 codes?
If the alarm list of your Riello UPS shows one or more of the following codes: L08, L09, L10, L11, L12, L13, it indicates an output short circuit. Power off the UPS, disconnect all the devices connected to the phase concerned by the short circuit, turn the UPS on again, reconnect the devices one by one until the faulty one is identified.
What does it mean when my Riello UPS alarm list shows L28, L29, L34, L35 codes?
If the alarm list of your Riello UPS shows one or more of the following codes: L28, L29, L34, L35, it indicates a breakdown or malfunctioning of the static bypass. Activate the maintenance bypass SWMB (if present), switch the UPS off and then on again.
General| Power factor | 0.9 |
|---|---|
| Output Power Capacity | 2700 W |
| Input Voltage | 230 V |
| Output Voltage | 230 V |
| Frequency | 50/60 Hz |
| Battery Type | Sealed lead-acid, maintenance free |
| Communication Ports | USB, RS232 |
| Weight | 18 kg |
| Operating Temperature | 0 ÷ +40 °C |
| Storage Temperature | -15 ÷ +50 °C |
| Humidity | 0 ÷ 95% non-condensing |
| Protection | Overload, short circuit |
Details the various ports on the UPS for connectivity and monitoring.
Explains the different modes the UPS can operate in.
Details the various operational statuses the UPS can be in.
Describes the UPS's protection against power flowing back into the supply.
Introduces the touch screen display and its capabilities.
Explains the top status bar showing UPS model, time, and alarms.
Accesses commands for system and battery operations.
Allows configuration of operating modes, auto-restart, and battery settings.
Allows adjustment of the UPS output voltage.
Allows adjustment of the UPS output frequency.
Enables scheduling of automatic battery health tests.
Sets the time for battery low alarm and buzzer notification.
Grants access to default commands and settings for authorized users.
Provides basic display actions with limited menu access.
Lists factory default configurations for output signals.
Lists factory default configurations for input signals.
Essential checks before powering on and operating the UPS.
Step-by-step guide to power on the UPS directly.
Verifies the UPS functionality during battery operation.
Checks the UPS status when running on battery power.
Verifies switching the system to static bypass.
Information on connecting and using external battery cabinets.
Codes indicating the current UPS operational status.
Codes indicating activated commands.
Codes referring to specific UPS configurations or operations.
Overview of UPS maintenance requirements and benefits.
Maintenance recommendations for UPS batteries.
Maintenance advice for the UPS cooling fans.
Instructions for cleaning and maintaining the UPS air filter.
To Next Page