41
20154249
Appendix - Accessories
Output regulator kit for modulating operation
With modulating operation, the burner continuously adjusts its
output to the heat request, thereby ensuring a great stability of
the controlled parameter: temperature or pressure.
The parts to be ordered are two:
– output regulator to be installed to the burner;
– probe to be installed to heat generator.
Gas trains in compliance with EN 676
Please refer to manual.
Parameter to be controlled Probe Output regulator
Adjustment field Type Code Type Code
Temperature - 100 ÷ 500° C PT 100 3010110
RWF50.2
RWF55.5
20099869
20099905Pressure
0 ÷ 2.5 bar 4 ÷ 20 mA 3010213
0 ÷ 16 bar 4 ÷ 20 mA 3010214
0 ÷ 25 bar 4 ÷ 20 mA 3090873
The installer is responsible for the addition of any
safety device not foreseen in this manual.
To Next Page
Loading...
