Riello RS 100/E - Installation; Notes on safety for the installation; Handling

20068428
20
GB
Technical description of the burner
4.13.2 Buttons description
Tab. K
Button Button Function
Button F
To regulate the fuel servomotor
(keep pressed and adjust the value by pressing or )
Button A
To regulate the servomotor air
(keep pressed and adjust the value by pressing or )
Button A and F
VSD Function
To modify the parameter for setting the P mode
(simultaneously press and plus or
Button Info and
Enter
• Enter in Parameters Mode
•
Reset in the event of a lockout
• Access to a lower level of the menu
• To navigate in
Service or Info Mode and allows:
– the selection of the parameter (flashing symbol) (press for <1 s)
– access to a lower level of the menu (press from 1...3 s)
– access to a higher level of the menu (press from 3...8 s)
– access to another Mode (press for > 8 s)
Button -
Reduction of the value
– Access to a lower point of the modulation curve
– Scrolling of the parameter list
Button +
Increase of the value
– Access to a higher point of the modulation curve
– Scrolling of the parameter list
Buttons - and +
Quit function (ESC)
(press and simultaneously)
– Does not confirm the value
– Access to a higher level of the menu
F
F
A
A
VSD
AF
F
A
/reset
ESC