20144599
36
Appendix - Accessories
Kit for LPG operation
The kit allows the RS 28-38-50 burners to operate with LPG.
Vibration reduction kit
Differential circuit breaker kit
Software interface kit
Radio disturbance protection kit
If the burner is installed in places particularly subject to radio
disturbance (emission of signals exceeding 10V/m) owing to the
presence of an INVERTER, or in applications where the length of
the thermostat connections exceeds 20 metres, a protection kit is
available as an interface between the control box and the burner.
Gas trains in compliance with EN 676
Please refer to manual.
A Appendix - Accessories
BURNER RS 28 RS 38 RS 50
Output kW 95 ÷ 325 115 ÷ 440 140 ÷ 581
Nozzle length mm 216 351 216 351 216 351
Code 3010079 3010080 3010081 3010082 3010083 3010084
BURNER RS 28 RS 38 RS 50
Output kW 81 ÷ 325 105 ÷ 440 116 ÷ 580
Nozzle length mm 216 351 216 351 216 351
Code 3010198 3010199 3010200
Burner Code
All models 3010329
Burner Code
All models 3002719
Burner Code
All models 3010386
The installer is responsible for the addition of any
safety device not foreseen in this manual.
To Next Page
Loading...
