RIESE & MUELLER Tinker - 3 Adjusting Your E-Bike; Frame Size Selection; Seat Position

15
3. ADJUSTING YOUR EBIKE
Before you can go on your first ride, your authorized dealer must adjust your new E-Bike to your
height, proportions and individual requirements.
3.2. SEAT POSITION
Your authorized dealer shall explain and set the seat position that fits you best.
When adjusting the height of the saddle yourself, proceed as follows:
3.1. FRAME SIZE SELECTION
Your authorized dealer shall select the frame size that is appropriate for you. Make sure that the
standover clearance of your E-Bike fits your body and proportions. A minimum standover clear-
ance of 2” to 5“ is recommended.
• Place the E-Bike between your legs.
• Measure the distance indicated by the arrow.
• This is the standover clearance.
• Rotate one pedal to its bottommost position
• Sit down on the saddle and place your heel
on this pedal. Your leg must now be fully
extended.
• If the leg is not fully extended, the saddle is
too low.
• If the heel does not reach the pedal,
the saddle is too high.
Standover clearance
Heel on the lower pedal