RIESE & MUELLER Tinker - Brake Inspection; Test of Setting of the Brake Levers; Brake Hoses; Brake Rotor

42
8. MAINTENANCE AND REPAIRS
8.3.2. Brake Inspection
8.3.2.1. Test of setting of the brake levers
To check proper functioning of the brake, pull the brake lever. Make sure you feel a distinct pres-
sure point and that you cannot pull the lever all the way to the grip. Otherwise, the brake needs
to be adjusted. For more information on how to adjust the brake, follow the separately included
instructions provided by the brake manufacturer. If you cannot readjust the brake lever, you must
contact your authorized dealer for assistance.
8.3.2.2. Brake hoses
All Riese&Müller E-Bikes are equipped with hydraulic brakes. Inspect all brake hoses and make
sure they have no kinks, damage of any kind and do not leak.
8.3.2.3. Brake rotor
Brake rotors must be free from grease and oil. Contact your authorized dealer if you have any
questions regarding the cleaning and care.