33
WARNING
If you want to adjust the stem, proceed as
follows:
1. Open both quick release levers A on the
stem hinge.
2. Press and hold the button B.
Set the stem to one of the three angle
positions C. Release the button B and make
sure the button engages. To check, rock the
stem back and forth a little.
3. Only use the three stem
positions C that are secured by the button B!
Failure to make sure that the button B has
properly engaged and has locked the stem
in place, may result in the stem coming
loose while riding and lead to hazardous
situations, accidents and injuries.
4. When the stem is locked in place, the red
lines on the side of the stem hinge line up
on top of each other (see lines D).
4. Close both quick release levers A.
7.4.1. Angle adjustment
Make sure prior to every ride that the pin is engaged properly and the quick release levers
are closed all the way.
Stop immediately if the stem shifts position by self during your ride.
Do not longer use your E-Bike and consult your authorized dealer immediately to have
the stem inspected.
Failure to close the stem fixation properly may result in hazardous situations, accidents,
injury or death.
A
D
B
C
A
A
WARNING
To Next Page
Loading...
