46
8.3.8. Suspension
Refer to and follow the instructions provided in the separately included manual supplied by the
suspension manufacturer.
Squeeze and release the suspension fork while applying the front brake. Squeeze and release
the rear shock by leaning yourself on the saddle and then getting o. If you can clearly hear or
feel play in the suspension, you must contact your authorized dealer to inspect the suspension.
8.3.9. Lighting
Check the setting of the headlight. The headlight must not be set too high so as not to blind on-
coming trac. The headlight must not be set too low because otherwise you will not be unable
to see far enough in the dark. For details on how to adjust the headlight, refer to section 5.7 on
page 24.
Check the tail light for tight fit.
Check the suspension fork and the rear shock
and make sure that there is no oil leaking.
In any case of leakage you must contact your
authorized dealer.
Use the included suspension fork pump to
check the air pressure in the air suspension
elements to be sure that the pressure has not
changed since the last time it was checked.
If the pressure has changed, use the pump to
renew the pressure.
8. MAINTENANCE AND REPAIRS
Oil leakage at the fork
For questions regarding legal compliance of your E-Bike with all applicable state and local
laws regarding lighting, please contact your authorized dealer.
To Next Page
Loading...
