RIESE & MUELLER Tinker - Torque Settings; Two-Year Limited Warranty

50
8.4.3. Torque Settings
8. MAINTENANCE AND REPAIRS
*) see the separate enclosed manual of the component manufacturer
**) see marking on component
PART FITTING TORQUE ft.lb / Nm
Coaster brake arm Mounting screw 35–53 / 4–6
Brake lever Mounting screw 44–53 / 5–6
Rear shock absorber Mounting screw 62–80 / 7–9
Freewheel Sprocket cassette lock ring 256–433 / 29–49
Delite carrier Mounting screw 71–88 / 8–10
Swingarm bushing Locking screw 44 / 5
Hydraulic brakes
*)
Crankset
Crank bolts 310 / 35
Chainring bolts 71–97 / 8–11
Rear hub
Axle nut Shimano gear hub 265–398 / 30–45
Axle nut Nuvinci gear hub 265–354 / 30–40
Axle nut Rohlo gear hub 265–310 / 30–35
Pedals 310 / 35
Kickstand Mounting screws 88106 / 1012
Rohlo gears
*)
Tail light Mounting screws 88–106 / 10–12
Seat post
Saddle clamp
*)
Seatpost clamp 80–106 / 9–12
Shifter
Derailleur shifter mounting screw 3544 / 45
Twist shifter mounting screw 918 / 12
Derailleur
Mounting screw 71–88 / 8–10
Cable fixing screw 35–53 / 4–6
Guide pulley bolts 27–35 / 3–4
Mudguards All mounting screws 27–35 / 3–4
A–Headset stem
Handlebar clamp with 4 screws
**)
Stem clamp bolt
**)
Bosch system *) 44–53 / 5–6