BEFORE EVERY RIDE MONTHLY ANNUALLY OTHER INTERVALS / REMARKS
Lighting Check function and secure fit
Check for damage, uneven or not true running
Verify minimum tread depth and check for damage
Brakes
Check lever stroke, pad thickness and pad position relative to the brake surface
Check all fittings / connections
Brake lines Visual inspection for leakage
Brake rotors Check thickness
✖ After every second replacement of the brake pads.
Suspension fork
Check for play and leakage
✖ See specification of the suspension manufacturer.
Rear shock absorber
Check for play and leakage
✖ See specification of the suspension manufacturer.
Rear swing arm Check function and bearing play
Check spoke tension, retighten axle nuts
Check wear and replace if necessary
Every 1,000km / 600miles
Belt drive Check wear, replace if necessary
Pedals Retighten fitting, check bearing play
Chainwheel, sprocket Check wear and replace if necessary
✖
Every 1,000km / 600miles
Handlebar, stem
Visual inspection
✖ After a fall, 12,500 miles / 20,000km or 5 years,
whichever occurs first
Handlebar grips Check secure fit
Headset bearings
Check bearing play
✖
Not necessary for cartridge bearings
Hubs Check bearing play, lubricate
Saddle clamp Retighten fitting
Seatpost Clean, lubricate seat tube
Switchgear Clean, lubricate, check function
Quick releases, thru axles Check secure fit
Screws and nuts Check secure fit
Mudguard mount Check secure fit
Shift cables Check function / replace
✖
•
Service and maintenance steps can be carried out by you as long as you have the
technical skill and the proper tools such as a torque wrench.
✖
Work shall be carried out by your authorized dealer during the annual inspection.
To Next Page
