30
7. OPERATION
7.1. DURING EVERY RIDE
You must observe the following during every ride to maintain your safety:
• Always hold the handlebar firmly with both hands to keep control of your E-Bike and to avoid
hazardous situations, accidents and injuries.
• If your E-Bike behaves in an unusual manner or you hear an unusual noise, immediately stop
the E-Bike and identify the problem. Make sure any problem is rectified before you ride again.
• Bring your E-Bike to your authorized dealer after any impact for a thorough inspection or any
necessary repair, adjustment or service.
7.2. SHIFTING SYSTEM
Select gears that best allow you to pedal at a speed that feels comfortable to you regardless
of the incline. When shifting gears it is important for you to keep pedaling steadily and without
excessive force until you reach the next gear. Refrain from switching gears while pressing the
pedals with great force.
Dependent on the particular model, E-Bikes from Riese & Müller use two kinds of shifters:
The following is a list of important checks that you must perform before every ride.
Read the included instruction manual supplied
by the gearshift manufacturer or have your
authorized dealer explain its operation to you.
NOTICE
Riding a defective E-Bike could decrease your control and cause you to fall.
WARNING
Twist grip: Rotating the right grip towards the
driver leads to an easier gear and rotating
the left grip away from the driver leads to an
easier gear. The grip indicates which gear you
are currently using.
Rapid Fire shifter: The thumb on the right side
shifts to easier gears and the index finger on
the right side shifts to harder gears.
To Next Page
Loading...
