34
WARNING
1. Open the quick release lever A.
2. Press the lock pin B and adjust the height of
the stem. With the lock pin B having been
pressed, the stem can be moved to dier-
ent height settings.
3. Depending on the stem type there are 5
or 6 dierent height settings available
4. Choose the correct height setting and make
sure that the lock pin B engages again.
5. Choose only stem height
settings that are secured by the engaged
lock pin B!
No position in between the holes are secu-
red by the lock pin B and therefore are not
safe. Failure to properly engage the lock
pin B may result in hazardous situations,
accidents and injuries.
6. Close the quick release lever A.
7.4.2. HEIGHT ADJUSTMENT
Make sure that prior to every ride that the pin B is engaged properly and the quick release lever
is closed all the way.
Stop immediately if the handlebar shifts position by itself during your ride.
Do not longer use your E-Bike and consult your authorized dealer immediately to have the stem
inspected.
Failure to close the clamping at stem and/or handlebar properly may result in hazardous
situations, accidents or injuries.
A
B
WARNING
7. OPERATION
To Next Page
Loading...
