Chapter 1 Disassembly and Assembly RIGOL
DG1000 Service Guide
Disassemble the Front Panel and LCD
Figure 1-8 Disassemble the Front Panel and LCD
Part Description:
① 4 screws (PTP3×8 torx pan head self-tapping screw, used for fastening the front
panel to the metal chassis)
② 3 screws (PTP3×8 torx pan head self-tapping screw, used for fastening the LCD to
the front panel.
Disassembly Steps:
1. Remove 4 screws (①) that fasten the front panel to the metal chassis using the
T10 screwdriver.
2. Remove the knob on the front panel.
3. Take off the front panel gently.
4. Remove 3 screws (②) that fasten the LCD to the front panel using the T10
screwdriver.
5. Take off the LCD gently.
②
②
①
①
②
To Next Page
Loading...
