Rigol DL3000 User Manual

RIGOL Chapter 2 Front Panel Operations
2-94 DL3000 User’s Guide
Set the Screen Brightness
You can set the screen brightness by using the brightness slider label. Moving left
decreases the brightness; and moving right increases the brightness. The setting is
stored in the non-volatile memory, which will not be affected even if you restore the
load to its factory defaults.
In the system setting tab, press the Up/Down arrow key to switch the parameter
focus to "Brightness", and then press the Left/Right arrow key or use the knob to set
brightness.

Rigol DL3000 Specifications

General

Brand	Rigol
Model	DL3000
Category	Measuring Instruments
Language	English