RIGOL Chapter 2 Front Panel Operations
2-2 DL3000 User’s Guide
Local/Remote Operation Mode
The load provides two operation modes: local and remote.
Local Operation Mode
After you power on the instrument, it enters the local operation mode by default. In
the local operation mode, all the keys on the front panel are available for you to use.
Remote Operation Mode
In the remote operation mode, you can send the programming commands from the
PC via any one of the interfaces (GPIB, USB, RS232, or LAN).
In remote operation mode, all the keys (except the Power key
and the Local
key) were disabled. You can only control the load by programming commands. To
return to the local operation mode, press Local on the front panel.
Factory test mode and APP functions (OCP/OPP) do not support remote operation.
To Next Page
Loading...
Need help?
General
