Rigol DL3000 User Manual

RIGOL Chapter 2 Front Panel Operations
2-54 DL3000 User’s Guide
Set P_Start
The power value when the load starts in OPP test mode. The default unit for the
value is W.
(1) In the guide interface, press the Up/Down arrow key to switch the
parameter focus to "P_Start".
(2) Enter a value by using the numeric keys. For setting methods, refer to the
descriptions in "Parameter Setting Method".
Set P_Step
The step power in OPP test mode. The default unit for the value is W.
(1) In the guide interface, press the Up/Down arrow key to switch the
parameter focus to "P_Step".
(2) Enter a value by using the numeric keys. For setting methods, refer to the
descriptions in "Parameter Setting Method".
Set Delay_Step
The time interval during which the power moves from step to step in OPP test
mode. The default unit for the value is ms.
(1) In the guide interface, press the Up/Down arrow key to switch the
parameter focus to "Delay_Step".
(2) Enter a value by using the numeric keys. For setting methods, refer to the
descriptions in "Parameter Setting Method".
Set OPP_V
The protection voltage in the OPP test mode. The default unit for the value is V.
(1) In the guide interface, press the Up/Down arrow key to switch the
parameter focus to "OPP_V".
(2) Enter a value by using the numeric keys. For setting methods, refer to the
descriptions in "Parameter Setting Method".
Set P_Max
The maximum value of the protection power in the OPP test mode. The default
unit for the value is W.
(1) In the guide interface, press the Up/Down arrow key to switch the
parameter focus to "P_Max".
(2) Enter a value by using the numeric keys. For setting methods, refer to the
descriptions in "Parameter Setting Method".
Set P_Min
The minimum value of the protection power in the OPP test mode. The default
unit for the value is W.
(1) In the guide interface, press the Up/Down arrow key to switch the
parameter focus to "P_Min".
(2) Enter a value by using the numeric keys. For setting methods, refer to the
descriptions in "Parameter Setting Method".

Rigol DL3000 Specifications

General

Brand	Rigol
Model	DL3000
Category	Measuring Instruments
Language	English