Rigol DM3058 Programming Guide

RIGOL
Programming Guide for DM3058
1-4
Parameter Types
1. Consecutive Integer Parameter
The parameters can be any integer only in effective range. Note that do not set
the parameters for decimal format, or else abnormal. For example, setting screen
brightness command ":system:display:bright”, the parameter range is from 0
to 255.
2. Consecutive Real Number Parameter
In effective value range, the parameters can be random value according to
precision (usually the default precision takes six effective digits behind decimal
point). For example, setting NULL offset command ":calculate:REL:offset”,
the parameters meet the range of the real number Table 3-10 indicated.
3. Discrete Parameters
The parameters can only be the cited value. For example, setting AC voltage
measuring range command ":measure:voltage:AC”, the parameter can only
be 0, 1, 2 or 3, but not other values.
4. Boolean Parameters
The parameters can only be ON or OFF. For example, setting beeper state
command “:system:beeper:state”, the parameter can only be ON or OFF.
5. ASCII Character String
The parameter should be composed of ASCII character string. For example,
setting querying IP address command ":utility:interface:LAN:ip”, the
parameter can be a self-defined character string.

Rigol DM3058 Specifications

General

Diode test	Yes
Product type	Digital multimeter
Frequency range	0.02 - 1000 kHz
AC current range	0.02 - 10 A
AC voltage range	0.2 - 750 V
DC current range	0.0002 - 10 A
DC voltage range	0.2 - 1000 V
Resistance range	200 - 100000000 Ω
Capacitance range	2 - 10000000 nF
Measuring category	CAT III 300V
Basic accuracy (frequency)	0.01 + 0.003
Basic accuracy (DC current)	0.055 + 0.005
Basic accuracy (DC voltage)	0.015 + 0.003
Basic accuracy (resistance)	0.020 + 0.003
Basic accuracy (capacitance)	1 + 0.5
Display digits	5.5 digits
Display size (HxV)	256 x 64 mm
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C

Weight and Dimensions

Depth	107 mm
Width	231.6 mm
Height	290.5 mm
Weight	2500 g