Rigol DM3058

RIGOL
Programming Guide for DM3058
3-7
Measure Commands
The commands are used to set measuring function further which equals to select
measuring function buttons in DM3058 front panel.
Which mainly include:
 :measure?
 :measure
 :measure:voltage:DC?
 :measure:voltage:DC
 :measure:voltage:DC:range?
 :measure:voltage:DC:impedance
 :measure:voltage:DC:filter:state
 :measure:voltage:AC?
 :measure:voltage:AC
 :measure:voltage:AC:range?
 :measure:current:DC?
 :measure:current:DC
 :measure:current:DC:range?
 :measure:current:AC?
 :measure:current:AC
 :measure:current:AC:range?
 :measure:resistance?
 :measure:resistance
 :measure:resistance:range?
 :measure:fresistance?
 :measure:fresistance
 :measure:fresistance:range?
 :measure:frequency?
 :measure:frequency
 :measure:frequency:range?
 :measure:period?
 :measure:period
 :measure:period:range?
 :measure:continuity?
 :measure:continuity